Tutorial CDMA Workshop 2.7

[the_kid25]

JUST COPAS....and tested me....
Main

Main section contains COM port settings, DM mode, AT commands, Phone connect, disconnect and phone mode settings.

Terminal

This is a low-level terminal which allows you to send internal commands and receive answer from a handset in Hex or ASCII format. It useful in different investigation and custom situations, for example it allow you to repair damaged SPC (0x00, 0x00... 0x00 for example) when a handset does not accept any SPC. It has a counter of total amount of bytes in commands, automatic CRC calculation and commands history, in order to facilitate usage.


Nam Programming

In order to program handsets to a necessary network you must write network settings such as Mcc, Mnc, Sid-Nid pairs, Primary/Secondary
channels and other. You can write these parameters here, as well as read existing network settings from a handset.Note that some networks with enabled roaming function are required to be programmed with valid IMSI also. Otherwise, incoming calls will fail. You can write valid "True IMSI" to phone in this window also.

VIEW CONTINUED click [Only the registered members can see the link click here to register]

[Google Adsense]